Hard PVC material

Jinlida hard PVC materials modified professionally on weather resistance, anti-aging, shock resistance, temperature resistance, flame retardancy and other aspects, are suitable for extrusion and injection molding processes with various colors。

Tel: 86-0571-88090377

Mail: 8093@hmhjx.com


Product performance

† Weather resistance:Can be usedin outdoor for 5 to 30 years.

† Anti-UV: The third-party detection of anti-UV grade can up to level 5.

†Shock resistance: Not be brittle when used in outdoor at 40 ℃。

† Flame retardancy: Meet the UL-94 of level V0.

† Environmental protection: Meets the EU ROHS environmental directive, can up to a REACH standard and does not contain (6P) phthalate and other level according to the customer demands。

† Can be customized: Can be customized according to the different requirements of customers。


Product properties parameters

Physical and mechanical properties Test Methods Unit Standard value (range)
Density ASTM D792 g/cm3 1.4-1.8
Hardness shore D ASTM D2240 67-80
Tensile Strength ASTM D638 Mpa 30-50
Tensile modulus ASTM D638 Mpa 1700-3300
Elongation at break ASTM D638 % 20-70
Vicat softening temperature ASTM D1525 65-80
Izod impact strength(gap) ASTM D256 J/M 50-90


Product Usage

Products are widely used in: building materials, automobiles,power grids, photoframe strip,pipe fittings valves, foam profiles and so on.


Product processing guidance

1、Machining process

  • The head mold is clean and heated
  • The temperature is set to the specified temperature, until the temperature reaches the specified temperature, the insulation for a period of time
  • Start the machine should be slow, screw speed reached the set value gradually
  • Shut down the machine before the material inside the screw net, and then shut down the mold

2、 Processing technology reference

  • † The product can be processed by vacuum extrusion, cold extrusion, coextrusion, film, bronzing, water transfer, thermal transfer process and so on.
  • † The Product has many advantages of good mobility, high surface brightness, mold adaptability, good thermal stability, low shrinkage, no precipitation, bronzing film firmly, easy to spray and so on.
  • † The specific processing needs to be based on formula, mold and product, the processing temperature set as 150-180 ℃ just for a reference.


There are no reviews yet.

Be the first to review “Hard PVC material”

Your email address will not be published. Required fields are marked *

Post comment